Pune
08048102514
+919960812423

What an Industrial Ball Screw Order Should Include for Pune CNC Machines

A request that says only “25 mm ball screw” leaves the supplier guessing about lead, travel, nut geometry, load, accuracy and shaft ends. By the end, you will have a purchase-order checklist that lets a supplier quote the correct assembly, test it against defined criteria and deliver a part that fits the CNC axis.

Key takeaways

  • Record the CNC machine model, serial number and axis before requesting a quote.
  • Specify diameter, lead, length, mounting details and nut dimensions—not diameter alone.
  • Define accuracy, load, speed, preload and acceptance tests in the purchase order.
  • Request protection, accessories, inspection documents and delivery terms before dispatch.

Start with the machine, axis and purchase-order identity

Identify the machine and axis before specifying the ball screw. A “25 mm ball screw” does not identify an order: the same nominal diameter can have different leads, nut lengths, load ratings and critical speeds. Record the machine’s make, model, serial number, axis designation and whether the screw is a new installation or a replacement.

Use these industrial ball screw order inclusions for CNC machines in Pune:

  1. State the purchase-order number, line-item number, quantity, drawing number and drawing revision.
  2. Name the axis, such as X, Y, Z, A or a machine-specific auxiliary axis.
  3. Give the nominal diameter, lead, right- or left-hand thread, usable stroke, total shaft length and nut type.
  4. Identify the required accuracy grade and inspection basis, such as permissible travel deviation over the useful travel under ISO 3408-3.
  5. State the delivery location, installation access limits and whether commissioning or alignment assistance is required.
  6. Separate the screw assembly from included services and accessories: end machining, nut installation, support bearings, locknuts, coupling, lubrication and protective covers.

Record these industrial ball screw order details on the quotation as well as the purchase order. Require the supplier to label the packing and inspection report with the same machine, axis, drawing revision and PO line number. That traceability prevents a correct-looking replacement from being fitted to the wrong axis.

Also separate ex-stock availability from manufacturing lead time; standard-nut stock does not prove that your accuracy grade and shaft length are ready.

Attach the dimensions that determine fit

A 25 mm diameter alone cannot identify a replacement. Send the supplier the nominal shaft diameter, lead, handedness, usable stroke, total shaft length, and required nut type; two 25 mm screws can have different nut lengths, load ratings and critical speeds.

Include these industrial ball screw order details:

  • Nut geometry: single or double nut, cylindrical or flanged body, nut length, flange diameter, bolt-circle diameter, bolt-hole size, ball-return arrangement, mounting orientation and lubrication-port location.
  • Shaft ends: bearing-seat diameters and lengths, threaded sections, locknut threads, keyways, shoulders, relief grooves, retaining-ring grooves and the distance between support bearings.
  • Assembly interfaces: fixed- and floating-end support-unit model, housing bore, mounting-face dimensions, coupling bore, key size, motor-side thread and the available installation envelope.
  • Drawing dimensions: usable travel, end clearances, datum position, tolerance limits and whether the stated length is working length or finished overall length.
Nut formDimensions to provideFit risk if omitted
CylindricalBody diameter, nut length, clamp or housing boreThe nut may not enter the existing housing
FlangedFlange diameter, thickness, bolt circle, hole diameterBolt holes may miss the machine face
Double nutCombined length, spacer size, preload arrangementThe assembly may exceed the available axis space

Attach a revised machine drawing or measure the existing screw before requesting an industrial ball screw in Pune. State whether shaft-end machining is included; a standard nut in stock does not prove the required machined screw will fit.

Define accuracy, load, speed and acceptance tests

State performance as measured limits, not as “high precision.” For a precision ground ball screw CNC application, specify the accuracy class and permissible travel deviation over the useful travel, referenced to ISO 3408-3 acceptance conditions. Add positioning accuracy, bidirectional repeatability, backlash target and required axial rigidity.

Include these industrial ball screw order details:

  • Axial load: working load, peak load, cutting-force direction, dynamic load rating, static load capacity and target service life in hours or revolutions.
  • Motion: maximum rapid-traverse speed, maximum screw rotational speed, acceleration, deceleration and duty cycle.
  • Accuracy: useful travel, permissible lead error, repeatability limit and preload or torque requirement.
  • Assembly: whether each value applies to the complete screw-and-nut assembly rather than the shaft alone.

Write the acceptance test conditions into the purchase order. Specify measurement temperature, lubricant state, measurement speed, travel range, datum direction and whether thermal warm-up occurs before testing. Without these conditions, two suppliers can report different results for nominally identical screws.

Require a dimensional inspection report, lead-accuracy or travel-deviation chart, axial-runout result and preload or running-torque measurement. Add material and heat-treatment traceability when required, plus the calibration reference for each measuring instrument.

Reject or hold the assembly if it exceeds the stated travel deviation, repeatability, runout or torque limit. A supplier’s certificate is useful only when its method and limits match your acceptance test.

Choose the screw process, nut arrangement and preload

Choose a ground screw, double nut or defined preload only when the axis error, rigidity or duty makes its extra cost measurable. A precision ground ball screw CNC axis suits contouring, interpolation and tight positioning because its lead accuracy and surface finish are controlled more closely than a rolled screw.

Choose rolled construction for point-to-point motion or moderate accuracy where lower cost and shorter availability matter.

OptionWhat it changesWhen the added cost is justified
Ground screwTighter lead accuracy, smoother motion and documented travel deviationOrder it for machining accuracy, interpolation, or a specified accuracy grade under ISO 3408-3
Double nutOpposing nuts remove axial clearance and increase rigidity, but require more length, alignment and installation timeUse it when backlash or cutting-force deflection exceeds the axis target; do not add it to a lightly loaded positioning axis
Defined preloadControlled interference raises stiffness and removes play, while increasing torque, heat and bearing loadSpecify it when repeatability, rigidity or cutting load demands it; select the preload class or force, not merely “preloaded”

An industrial ball screw in Pune should have the order state the accuracy grade, permissible travel deviation over the useful travel, and acceptance method. Request lead-accuracy results, axial runout, preload or running-torque readings, dimensional inspection, and calibration reference for the measuring equipment.

Confirm that the nut body, flange, lubrication port and mounting orientation match the machine; a matching diameter and lead alone do not prove compatibility.

Specify protection, accessories, documents and delivery terms

A quote that says “25 mm ball screw” is not a delivery commitment. For CNC ball screw supply in Pune, require the supplier to repeat the nominal diameter, lead, handedness, usable stroke, total shaft length and nut type, then state whether the exact accuracy grade is in stock or must be manufactured.

  • Protection: Specify wipers or bellows, shaft-end caps, corrosion protection and packing that prevents impact, moisture and contamination during transport and storage.
  • Accessories and services: State whether nut installation, shaft-end machining, support bearings, locknuts, coupling, lubrication, grease or oil specification, and initial adjustment are included.
  • Operating conditions: Provide axial load, maximum speed, acceleration, duty cycle, target service life, coolant or chip exposure, and ambient temperature. Require confirmation of dynamic load rating, static capacity and critical speed.
  • Inspection documents: Request dimensional results, lead-accuracy or travel-deviation results, axial runout, preload or torque measurement, and material and heat-treatment traceability when required. Name ISO 3408-3 and the calibration reference for measuring equipment.
  • Commercial terms: Separate ex-stock availability from manufacturing lead time. State whether delivery includes inspection, shaft machining, packing, freight, taxes and commissioning, plus the warranty period and replacement procedure.

These are the industrial ball screw order inclusions CNC machines in Pune need to avoid receiving a correct-looking part that cannot be installed. Balaji Engineering Works, for example, should be asked to identify every excluded accessory rather than leave installation costs implicit.

Related products

Single Nut Precision Ground Ball Screw

Precision Ballscrews

Single Nut Precision Ground Ball Screw

Balaji Engineering Works offers high-precision Single Nut Precision Ground Ball Screws in Pune, engineered for applications requiring superior...

View product →
Precision Ball Screw

Precision Ballscrews

Precision Ball Screw

Balaji Engineering Works is a trusted manufacturer and supplier of Precision Ball Screws in Pune, designed for high-accuracy linear motion and...

View product →

Frequently asked questions

  • What machine details belong in an industrial ball screw order?

    Include the CNC machine make, model, serial number, axis designation and whether the screw is a new installation or replacement.

  • Which dimensions determine whether a ball screw will fit?

    State nominal diameter, lead, overall length, travel, nut dimensions, shaft ends, mounting interfaces and the available installation space.

  • What performance requirements should the purchase order define?

    Specify positioning accuracy, repeatability, axial load, operating speed, duty cycle, lubrication requirements and the acceptance tests for the supplied screw.

  • How should you specify ball screw process, nut arrangement and preload?

    Name the required screw process, such as precision grinding or rolling, then define the nut arrangement and preload class needed for the CNC axis.

  • Which protection, documents and delivery terms should accompany the order?

    Specify wipers, bellows or covers, lubrication and mounting accessories, inspection reports, material and traceability records, packaging, delivery date and replacement terms.

Related products

Precision Ground Ball Screw

Precision Ballscrews

Precision Ground Ball Screw

Balaji Engineering Works is a trusted manufacturer and supplier of Precision Ground Ball Screws in Pune, designed for applications that demand...

View product →
High Precision Ball Screw

Precision Ballscrews

High Precision Ball Screw

Balaji Engineering Works offers premium quality High Precision Ball Screws in Pune, designed for applications that demand exceptional accuracy,...

View product →
Ball Leading Screw

Precision Ballscrews

Ball Leading Screw

Balaji Engineering Works offers high-quality Ball Lead Screws in Pune, designed for precise and efficient conversion of rotary motion into linear...

View product →
Double Nut Rolled Ball Screw

Precision Ballscrews

Double Nut Rolled Ball Screw

Balaji Engineering Works offers high-performance Double Nut Rolled Ball Screws in Pune, designed for applications requiring reduced backlash,...

View product →
 2026-11-20T11:00:28

Keywords